Pulse Reciever Batteries? Can You Feel the Power?
Pulse receiver batteries bring power, performance and value to the RC scene, allowing you to select the receiver pack of your choice at a cost & performance level that sets a new industry standard.
Available in 2250mah, 3600mah and 5000mah packs 2S 7.4V, Pulse has you covered with a receiver pack that will not only fit your budget, but also your aircraft as well, allowing you to push your flights with a pack that will perform.
Pre-soldered with connectors allowing the battery to be plugged directly into your receiver, Pulse Ultra receiver batteries are ready for flight - choose what fits you!
Note: This receiver battery is designed for 1C charge rate and a 6C discharge rate - do NOT exceed greater than 1C during the charging of this LiPo battery. Any charge rate greater than 1C / discharge rate greater than 6C will immediately void the warranty and very well may end up in pack destruction via fire. It is the end users responsibility to ensure proper safe charging practices, so please be aware of this.
Warning: This LiPo receiver battery is intended to power servos, receivers & other accessories onboard the aircraft, and is in no way designed for use as a flight power system, such as powering a motor / ESC system. Due to the lower discharge rate and lighter gauge wiring, any use as a flight pack will immediately void the warranty of this LiPo battery, and very well may cause battery failure.
- Voltage: 7.4V
- Cell Count: 2S
- Capacity: 3600mAh
- Dimensions: 100mm x 46mm x 16mm (LxWxH)
- Weight: 159g